You’re the parent and your children seem to be have some deep interest on the robotics or electronics stuffs? Well, if they did, you might want to keep your kids busy with this Arduino Simple Walker!

For your information, this Arduino Simple Walker is the ideal little project to introduce your children to the Arduino’s world. This Arduino Simple Walker had already equipped with essential components. All your children have to do here is simply assembling them. The only material that you need to purchase is the Acrylic Arctic Ice (Frosted 1-side) 4.5mm.

Frankly, you have to pay attention on some of the steps here. First of all, please make sure that the holes to mount the servos onto the leg base is large enough, as you don’t want the hassle to drill these holes over and over again!

Once your children are done with the holes, it’s time to control the servos. In this case, you might want to use the standard “sweep” sketch, where is already included with the Arduino IDE.

Beside that, do mind about the servos, as different types of servos have different varying pulse rates.