Blinking LED with LPC2103 under Linux

February 28, 2008 | By admin In ARM7 Projects |
-->

This is small blinking LED demo application for LPC2103 Olimex board. Project compilation was made under Linux by using GCC tools and debugged openOCD debugging software.

lpc2103_olimex_led_blink.jpg

Benedikt Sauter describes the process of building project with arm-elf-gcc and debugging with openOCD via JTAG interface. Follow these steps and you will make your first ARM7 project under Linux. Necessary project files can be downloaded here.

[Read]

Other Related Posts:

1 Comment so far

  1. Electronics-Lab.com Blog » Blog Archive » Blinking LED with LPC2103 under Linux on February 28th, 2008

    [...] Benedikt Sauter describes the process of building project with arm-elf-gcc and debugging with openOCD via JTAG interface. Follow these steps and you will make your first ARM7 project under Linux. Necessary project files can be downloaded here. [via] [...]

Leave a reply