Comments on: LPC2148 controlled GPS car speed and position logger http://www.embedds.com/lpc2148-controlled-gps-car-speed-and-position-logger/ MCU project everyday Thu, 11 Mar 2010 18:16:18 +0000 http://wordpress.org/?v=2.9.2 hourly 1 By: Bùi Tấn Được http://www.embedds.com/lpc2148-controlled-gps-car-speed-and-position-logger/comment-page-1/#comment-2920 Bùi Tấn Được Sat, 21 Mar 2009 04:30:45 +0000 http://www.embedds.com/?p=276#comment-2920 Please help me do the same project with : LPC2378, MMC/SD Card, Keil RealView MDK. Thanks very very very much Please help me do the same project with : LPC2378,
MMC/SD Card, Keil RealView MDK.
Thanks very very very much

]]> By: artemis http://www.embedds.com/lpc2148-controlled-gps-car-speed-and-position-logger/comment-page-1/#comment-860 artemis Mon, 11 Aug 2008 17:10:46 +0000 http://www.embedds.com/?p=276#comment-860 can I use this project to portable on nxp2148 JX-2148 Plus board. can I use this project to portable on nxp2148 JX-2148 Plus board.

]]> By: rohit http://www.embedds.com/lpc2148-controlled-gps-car-speed-and-position-logger/comment-page-1/#comment-632 rohit Sun, 11 May 2008 10:12:26 +0000 http://www.embedds.com/?p=276#comment-632 thx thx

]]> By: Electronics-Lab.com Blog » Blog Archive » LPC2148 controlled GPS car speed and position logger http://www.embedds.com/lpc2148-controlled-gps-car-speed-and-position-logger/comment-page-1/#comment-551 Electronics-Lab.com Blog » Blog Archive » LPC2148 controlled GPS car speed and position logger Fri, 04 Apr 2008 06:48:44 +0000 http://www.embedds.com/?p=276#comment-551 [...] Software is based on FreeRTOS where ChanFS file system is used for storing logged data in SD/MMC FAT16 formatted card. It also has USB serial port emulation which enables to monitor NMEA sequences or simply retrieve logs as from mass storage device without removing CD/MMC card. Project files for WinARM GCC can be downloaded here. [via] [...] [...] Software is based on FreeRTOS where ChanFS file system is used for storing logged data in SD/MMC FAT16 formatted card. It also has USB serial port emulation which enables to monitor NMEA sequences or simply retrieve logs as from mass storage device without removing CD/MMC card. Project files for WinARM GCC can be downloaded here. [via] [...]

]]>